My ride...

Here you can find images and specs of our member's car. Please use the gallery to upload your pictures.

Moderators: daewoomofo, Moderators Group

Locked
Efratech
Admin
Posts: 2280
Joined: Wed Oct 30, 2002 6:41 pm
Location: Dominican Republic
Contact:
Contact Efratech

Post by Efratech »

as far im aware it was totally stock, even the headgasket,

now has the pistons and ARP rod bolts for a raised limiter.
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
Top
User avatar
Danny Boy
Posts: 28
Joined: Thu Jan 05, 2006 7:12 am
Location: In My Opel

Post by Danny Boy »

daewoomofo wrote:you said this is on stock engine, did you use a mls head gasket or anything, or was the engine totaly stock? and your new pistons, are they stock compression ration or did you get low compression ones when you got new ones?
Yes the engine used to be stock.. I lowered the compression on the stock pistons by using a 2mm head gasket spacer...
The arias pistons have a compression ratio of 8.5:1. Currently using the Victor Ryans gasket set on the car that we get locally from the agents or engine parts suppliers
Image
2000 Corsa GSi
205kw's and 321nm's at the wheels
In Allen we trust
Top
Locked

Return to “Member's Cars and specs”