This is right after I got my GTI and lowered it.
![Image](http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc3/17136_1166877903742_1581750155_30359207_2959052_n.jpg)
Got it lowered some more and started on some body work, along with some Corvette wheels
![Image](http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/45947_1340970175940_1581750155_30712974_369341_n.jpg)
This was a few months ago after making my dual exit exhaust
![Image](http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/271076_1820600966410_1581750155_31369510_2753520_n.jpg)
And as it sits now, almost done with body work.
![Image](http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/206010_1856384500976_1581750155_31410655_6591462_n.jpg)
After I got my income tax back in Feburary, I picked up a 1969 VW bus for $600 with the engine sitting in its back seat, put it all together, drove it for a few months and sold it for $2300 after having it listed for 2 hours.
![Image](http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/200136_1601518289480_1581750155_31143165_5320085_n.jpg)
After selling that I picked this 1986 vw gti up for $600 from a friend. Ran and drove fine, was a bit dirty, so spent 2 hours clay baring and waxing and this is how it sat
![Image](http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/222715_1656472183293_1581750155_31210069_6105875_n.jpg)
After driving it for a few weeks, the 1.8l 8v wasnt cutting it, so I picked up a 2.0l 8v engine from a 94 gti and started on the swap.
Before:
![Image](http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/230137_1669402666547_1581750155_31228129_5348618_n.jpg)
During:
![Image](http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/224718_1669403546569_1581750155_31228137_2736687_n.jpg)
After:
![Image](http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/230751_1686660137973_1581750155_31245127_3866933_n.jpg)
I am now daily driving this as a big turbo engine isnt the best thing to daily.
I pulled the daewoo off the side of the house yesterday and into the driveway and it sat like this
![Image](http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/293341_1874930404612_1581750155_31432189_7469828_n.jpg)
Pulled the head and cleaned up the bay
![Image](http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/300595_1874636717270_1581750155_31431759_5463528_n.jpg)
And I just picked up the head a few hours ago from the machine shop.
![Image](http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/205953_1876809171580_1581750155_31434117_5636105_n.jpg)
I plan on just getting this heap running reliably and then I will decide if I want to fab up an exhaust manifold to boost it or now.