Got Rims?

[FoRk]

i need stock lanos rims, anyone got soem they wanna sell me???
if you do pm me.

[PrecisionBoost]

Do yourself a favor..... go down to the local scrap yard and ask for some rims from a 1987 to 1991 Pontiac LeMans.

Not only do they fit, they are cheap as hell because nobody wants them.

I negotiated a price of $5 per rim with tires....they had 5 cars and all had tires so I got to pick the best 4 out of the 20

The tires are older but they are still good enough to be "spares"

[FoRk]

i live on maui, all we have is hondas. i was looking for some lanos rims, you know not the black ones. but the alloy ones.

[PrecisionBoost]

Oddly enough honda rims should fit the Lanos.

Both have a 4 X 100mm bolt pattern and the central hubs are nearly identical in size.

I can't find my link to the hub size cross reference....it must be on my home computer.... the Honda Civic and Acura Integra both work but I can't remember which years.

In theory they should work, but I don't think anyone has tried it yet.

Ok.... did some digging around and the Honda/Acura 4X100 rims use a hub diameter of 56.1mm

The lanos uses a 56.6mm hub

So the Honda/Acura hubs are only 0.5mm smaller.

Given this is only 0.25mm off each side I have to think they should push onto the Lanos Hub..... or you could use emery cloth to remove some of the inside material.

0.25mm is only 0.0098" which is about 1/100 of an inch.

By the way the stock Lanos offset is 49mm.

[Goldenboy]

I have Mazda precidia 93 rims on my car t'ill all the snow is gone....hopw this could help.

Mat

[senate]

I have a set of the Krieger 15" 5spoke alloys that came out on the Lanos Sports here in australia.

Problem is shipping etc, you're probably better off finding them more local.


These are the rims on my car before I got the new ones: