T20/T22 turbo manifold

pontiacjeff · Post by **pontiacjeff** » Fri Mar 11, 2005 5:01 am

I built this turbo manifold for my T20 head swap onto the older C20GET turbo. This will fit any daewoo head (I think even the 1.5) or Euro-Asian Z20/Ecotec 1.8/2.0/2.2. It has a 1/2"-thick flanges, Schedule 40 steel tubing. it has a T25/T28 outlet flange or you can mount a T3 with an adapter plate. It has been stress-relieved, surfaced, and run for about 5K miles. I am only selling b/c I am upgrading to a tubular header manifold. It is real nice custom manifold. 250.00obo. Serious inquiries only. Pics available by e-mail.

lanos2001 · Post by **lanos2001** » Fri Mar 11, 2005 6:39 am

lanos2001@hotmail.com

i'm really interested in the pics man. i wanna see what it looks liketo see if its where i wanna put the turbo.

nick

daewooluvr · Post by **daewooluvr** » Fri Mar 11, 2005 2:36 pm

I don't think this will fit a 1.5 or 1.6L head.

pontiacjeff · Post by **pontiacjeff** » Fri Mar 11, 2005 7:01 pm

No, I think they are different. Actually, I think the 1.6DOHC might be the same. You can ask any parts counter for the exhaust manifold gasket part number and see if the 1.5/1.6/1.8 will interchange with the 2.0/2.2.

GsiTurbo · Post by **GsiTurbo** » Fri Mar 11, 2005 7:59 pm

They are very much different. I just compared the 2 I have in stock.

pontiacjeff · Post by **pontiacjeff** » Fri Mar 11, 2005 8:35 pm

O.k., so it won't fit a 1.6.

richardmatalon · Post by **richardmatalon** » Mon Mar 14, 2005 4:33 am

p.m. sent jeff. I hope that you will accept my offer. thanks

Me · Post by Me » Mon Apr 18, 2005 11:12 pm

couldnt you just cut the 1.6 header flanges off and adapt them to the turbo manifold

pontiacjeff · Post by **pontiacjeff** » Tue Apr 19, 2005 2:00 am

Sold.........