Hey everyone, it's time to move on and start some other projects that have been sitting around. I have to get rid of my...
-89 Pontiac Lemans GSE (stripped for drag or road race use)
-99 Nubira (stripped for for rally use)
-00 Lanos (stripped for drag or rally use)
I have a ton of parts and am willing to work out deal with parts and or work in the chassis's. for now I'm going to pull the motors and trannies from these cars. if I don't get any interest in the next week or so then they are all going to the scrap yard.
the Lemans has a ton of potential, it has a genuine carbon fiber hood, quad head lights, fiberglass body kit, wide body fender flares, digi-dash and a lot more.
the Lanos needs a front wrap but has the rear disc conversion from the Saturn kit I was making
the Nubira has been pretty well stripped, I was setting it up for rally. the car is worth about $200 to me (scrap value)
the Lemans and Lanos are negotiable, I can include or exclude whatever. all of these cars are probably going to the scrap yard but I would feel bad if I didn't at least try to find a good home for them.
No worries tho, I'll still be around. I'm going to keep my 02 Lanos and I'll be building a 1942 Chevy "ratrod" pickup with a turbo T22SED.
Cheers
clearing out some chassis's!
Moderators: daewoomofo, Moderators Group
- PrecisionBoost
- Super Moderator
- Posts: 4437
- Joined: Thu Jun 19, 2003 5:59 am
- Location: Edmonton, Alberta, Canada
Re: clearing out some chassis's!
Let me know what you want for the Lemans.
Do you have some recent pictures?
Do you have some recent pictures?
2010 BMW 335D
1994 Opel Calibra 4X4 turbo ( C20LET 2.0L Turbo )
2002 Daewoo lanos
1994 Opel Calibra 4X4 turbo ( C20LET 2.0L Turbo )
2002 Daewoo lanos
-
- DTM Daewoo Mod
- Posts: 2394
- Joined: Fri Jun 23, 2006 4:20 am
- Location: Englewood, Colorado United States
- Contact:
Re: clearing out some chassis's!
we would have to work out a deal with the lemans. I love this car a lot, I just can't afford to do it justice. I would want to finish tubbing the back for the widebody before it left here tho.
Re: clearing out some chassis's!
damn that is a nice bit of kit garrett
i hope it goes to someone that will do it proud, and like you say, do it justice
i hope it goes to someone that will do it proud, and like you say, do it justice
- PrecisionBoost
- Super Moderator
- Posts: 4437
- Joined: Thu Jun 19, 2003 5:59 am
- Location: Edmonton, Alberta, Canada
Re: clearing out some chassis's!
The silver chassis is causing me grief, it's definitely showing it's age and wear at this point, as well the wiring has been hacked into pieces accommodating three different engines with four different engine management systems over the years.
At this point the car needs about $5k worth of body work to get it back to show quality ( lots of dents, scratches, warped panels, some rust starting, about six holes that need to be filled, hood/bad boy additions cracking and lastly I have some areas where paint is peeling off as it's been painted several times already and the color matching isn't as good as it should be )
At this point I'm going to rip the C20GET from my other Passport Optima along with pretty much the entire wiring harness and drop it into the silver chassis so I can sell it. (minus some of the parts from the UK/Europe )
I was going to buy another Calibra and get rid of all the Optima/Lemans chassis, but you've done quite a bit of work on your chassis and it wouldn't be hard to bring it up to show quality again.
I had also planned on widening the fenders along with building a carbon fiber hood so your already more than half way there.
At this point the car needs about $5k worth of body work to get it back to show quality ( lots of dents, scratches, warped panels, some rust starting, about six holes that need to be filled, hood/bad boy additions cracking and lastly I have some areas where paint is peeling off as it's been painted several times already and the color matching isn't as good as it should be )
At this point I'm going to rip the C20GET from my other Passport Optima along with pretty much the entire wiring harness and drop it into the silver chassis so I can sell it. (minus some of the parts from the UK/Europe )
I was going to buy another Calibra and get rid of all the Optima/Lemans chassis, but you've done quite a bit of work on your chassis and it wouldn't be hard to bring it up to show quality again.
I had also planned on widening the fenders along with building a carbon fiber hood so your already more than half way there.
2010 BMW 335D
1994 Opel Calibra 4X4 turbo ( C20LET 2.0L Turbo )
2002 Daewoo lanos
1994 Opel Calibra 4X4 turbo ( C20LET 2.0L Turbo )
2002 Daewoo lanos
Re: clearing out some chassis's!
It's been a while since i've been here but do you have pics of the 99 lanos? And could you pm me a price including or excluding shipping to tennesse zip code 37663?
-
- DTM Daewoo Mod
- Posts: 2394
- Joined: Fri Jun 23, 2006 4:20 am
- Location: Englewood, Colorado United States
- Contact:
Re: clearing out some chassis's!
I'll have to get back you on the lanos, sorry for the delay.
the 99 Nubira is the first one that will be leaving here. I'll part out waht I can. if anyone needs parts for their Nubi let me know, they will be dirt cheap.
all the glass is there and perfect. the seats are great. the HID head lights need a little love but can be very nice. the tail lights are perfect. guage cluster...
I plan on stipping what I can and crushing the rest.
i'd take $150 for a the car without the motor and tranny. clear title and would make a great rally car.
the 99 Nubira is the first one that will be leaving here. I'll part out waht I can. if anyone needs parts for their Nubi let me know, they will be dirt cheap.
all the glass is there and perfect. the seats are great. the HID head lights need a little love but can be very nice. the tail lights are perfect. guage cluster...
I plan on stipping what I can and crushing the rest.
i'd take $150 for a the car without the motor and tranny. clear title and would make a great rally car.
-
- DTM Daewoo Mod
- Posts: 2394
- Joined: Fri Jun 23, 2006 4:20 am
- Location: Englewood, Colorado United States
- Contact:
Re: clearing out some chassis's!
the nubira is gonna be gone tomorrow.
I'd take an offer for the lemans as it is in the pictures plus quite a lot of extras. i would like it to be gone soon as well. if I don't sell it then I'll keep the parts and do a lemans front wrap on my lanos.
I'd take an offer for the lemans as it is in the pictures plus quite a lot of extras. i would like it to be gone soon as well. if I don't sell it then I'll keep the parts and do a lemans front wrap on my lanos.
Re: clearing out some chassis's!
Awe! I was too late, If you still have any nubira parts from the 99 let me know! I'm still interested in pretty much anything you might have. If not Sorry I was late! =(
a woo that is a work in progress