INTAKE FOR 2000 NUBIRA

BiggP · Post by **BiggP** » Thu May 18, 2006 7:05 pm

Hey everyone got a quick question...I was wondering if there was a cold air intake for another car that would work on mine and fit.I see alot on ebay for civics and other cars but none for daewoo..can i buy one for another model and fit it on my car? thanks for your guys help
pics of my car coming soon

daewoomofo · Post by **daewoomofo** » Thu May 18, 2006 9:26 pm

the only thing i can think of is ti do something like MMamdouh did
http://www.daewootech.com/forum/viewtop ... 2497#62497, jsut go to home depot and get the pvc, its really cheap, and should work really good for you

BiggP · Post by **BiggP** » Thu May 18, 2006 10:27 pm

Kewl..do i have to worry about any kind of sensors on my factory intake?...or just run a pvc pipe down

daewoomofo · Post by **daewoomofo** » Thu May 18, 2006 10:32 pm

yeah you will have to transfer you AIT sencor to your new PVC CAI, its easy you only need to drill a hole for it to go in to, yeah hit me up on aim or msn messanger some time, id love to see your car (your location is really close to me)

Slammed · Post by **Slammed** » Thu May 18, 2006 10:42 pm

or you can do what I did it was very cheap and looks better
http://www.daewootech.com/forum/viewtop ... 61&start=0

lanos2001 · Post by **lanos2001** » Thu May 18, 2006 10:43 pm

or you can do what I did it was very cheap and looks better

but he has a 2.0l nubira.

nick

daewoomofo · Post by **daewoomofo** » Thu May 18, 2006 10:51 pm

actually what i would do is to keep the origional intake hose and just extend it with the PCV, that way you wouldnt have to deal with making the first piece that connects to the throttle body, it would be alot easier

blueoptra · Post by **blueoptra** » Fri May 19, 2006 4:07 am

why not try this very easy and efective!
http://www.daewootech.com/forum/viewtop ... c&start=15

pavlozky · Post by **pavlozky** » Fri May 19, 2006 12:45 pm

Or you can simply go to a Pep-Boys and find this kind of stuff to have one real nice intake..
http://www.daewootech.com/forum/viewtopic.php?t=6546

dinoc · Post by **dinoc** » Thu Jun 15, 2006 8:46 pm

Hi guys,

I'm thinking to build or buy (not sure if there are any) a CAI for my Nubira 1.6L 16v DOHC (Nubira II) .
Can you please sugest me what kind of conic filter should I buy (for instant K&N or other good brands) for this engine ?
Also, what dimeaters should I use for the pipes ?

Thanks

delphis · Post by **delphis** » Thu Jun 15, 2006 8:53 pm

actually I am in the process of making one out of pvc, but like mofo said the throttle body inlet is larger than the pipe, I will take a picture of my cheap sri when my girlfriend gets home, you could even modify on that.

Nubira2.2 · Post by **Nubira2.2** » Thu Jun 15, 2006 9:11 pm

u can buy a WaeponR intake they make them for DAEWOO cars

dinoc · Post by **dinoc** » Thu Jun 15, 2006 9:22 pm

Yes, I was just looking on weapn-r's web page ... but my concern is : do the 2.0L DOHC Nubira and 1.6L DOHC Nubira, use the same CAI or SRI setup (filter, pipes diameters ...) ? - what is good for 2.0L engine is it good for the 1.6L, too ?

delphis · Post by **delphis** » Thu Jun 15, 2006 9:34 pm

post a pic of a 1.6l engine bay and I will tell you if the 2.0 and 1.6l are the same.

daewoomofo · Post by **daewoomofo** » Thu Jun 15, 2006 9:38 pm

the 2.0 have a top mount throttle body and the 1.6 gave a side mount throttle body, so no the two are not the same, sorry

The original daewootech forum

INTAKE FOR 2000 NUBIRA

INTAKE FOR 2000 NUBIRA

CAI for Nubira II, 1.6L DOHC ?