I guess I ordered the wrong header
Moderators: daewoomofo, Moderators Group
- Brian5475E
- Expert
- Posts: 753
- Joined: Tue May 11, 2004 2:49 am
- Location: Cincinnati, Ohio USA
- Contact:
I guess I ordered the wrong header
I bought a header for the tib 1.8 2.0, because shark racing has their header for that car and engine fitting the lanos. So I figure if it fits the lanos it will fit the aveo. Wrong not even close. so now I have a header I paid $165 for and can't use it. the ports are all wrong. the hyundai header has round ports and my aveo has oval ports, plus the header won't mount up, its too small. Anyone know a hyundai owner looking for a header?
Last edited by Brian5475E on Tue Nov 30, 2004 7:16 pm, edited 1 time in total.
Aveo that moves! Now I need those cams!
- Brian5475E
- Expert
- Posts: 753
- Joined: Tue May 11, 2004 2:49 am
- Location: Cincinnati, Ohio USA
- Contact:
I do believe I read it correctly. Thier header will fit these models
1996-2001 Tiburon 1.8/2.0
2003-2004 Tiburon 2.0
1996-2004 Elantra 1.8/2.0
1995-2004 Accent 1.3/1.5/1.6
1999-2003 Daewoo Lanos 1.5/1.6
Well I bought one for a 95-04 accent 1.5. Which is the header they said would fit a lanos 1.6, well no fit not even close.
1996-2001 Tiburon 1.8/2.0
2003-2004 Tiburon 2.0
1996-2004 Elantra 1.8/2.0
1995-2004 Accent 1.3/1.5/1.6
1999-2003 Daewoo Lanos 1.5/1.6
Well I bought one for a 95-04 accent 1.5. Which is the header they said would fit a lanos 1.6, well no fit not even close.
Aveo that moves! Now I need those cams!
- BosnianLanos
- Expert
- Posts: 1661
- Joined: Thu May 27, 2004 10:31 pm
- Location: Clearwater, Florida
- Contact:
I am begining to think that the Aveo and the Lanos are more different that we had first assumed.
Your Headers don't fit.
The ThrottleBody doesn't fit on the Intake Manifold.
Intake Manifold probablly has different mounts.
My ignition coil didn't fit.
I think someone needs to seriously research the Aveo and see just how much changed from the Lanos.
Your Headers don't fit.
The ThrottleBody doesn't fit on the Intake Manifold.
Intake Manifold probablly has different mounts.
My ignition coil didn't fit.
I think someone needs to seriously research the Aveo and see just how much changed from the Lanos.
I guess Im confused. You chose the one for the accent when you should of selected the ones for the lanos.
the page probably looked like this...unless you got the 4-1.
http://www.sharkracing.com/acecart/bin/ ... =011003000
Why didn't you select the Lanos? Their parts fit perfectly, at least the ones I have purchased.
the page probably looked like this...unless you got the 4-1.
http://www.sharkracing.com/acecart/bin/ ... =011003000
Why didn't you select the Lanos? Their parts fit perfectly, at least the ones I have purchased.
- GsiTurbo
- Super Moderator
- Posts: 1791
- Joined: Thu Mar 13, 2003 10:56 pm
- Location: Edmonton, Alberta, Canada
- Contact:
This is very interesting. Based on the information I have, the Lanos 1.6 16V and Aveo/Swift 1.6 16V do share the same cylinder head. As a result, Lanos exhaust manifold should fit the Aveo.... Perhaps the part received from Shark was wrong??
Brian: Would you mind posting the contour of Aveo's exhaust manifold gasket?
Lanos 1.6 owners: Can someone post exhaust manifold gasket drawing?
Brian: Would you mind posting the contour of Aveo's exhaust manifold gasket?
Lanos 1.6 owners: Can someone post exhaust manifold gasket drawing?

__________________________
2002 Lanos 1.5 SOHC... stock!!!
-
- Expert
- Posts: 375
- Joined: Fri May 07, 2004 1:19 pm
- Location: Belgium
1999-2003 Daewoo Lanos 1.5/1.6 <== shark racing is SO WRONG
the 1.5 lanos and 1.6 header are no where near the same the 1.5 is still a opel header from a kadet e (if i recal correct) the lanos 1.6 header is totaly difrent... the 1.5 and 1.6 are NOT interswapebel
Also iv never seen a header thats made for a 1.5 and a 2.0 engine at teh same time?.... that means:
A.) poor calibration of tubes
B.)they dont know wtf they are talking about
the 1.5 lanos and 1.6 header are no where near the same the 1.5 is still a opel header from a kadet e (if i recal correct) the lanos 1.6 header is totaly difrent... the 1.5 and 1.6 are NOT interswapebel
Also iv never seen a header thats made for a 1.5 and a 2.0 engine at teh same time?.... that means:
A.) poor calibration of tubes
B.)they dont know wtf they are talking about
- PrecisionBoost
- Super Moderator
- Posts: 4437
- Joined: Thu Jun 19, 2003 5:59 am
- Location: Edmonton, Alberta, Canada
Keep in mind that in Korea that they have a 16V 1.5L ( A15DMS ) as well as an 8V 1.5L (A15SMS).
We've allready tore apart an Aveo.... I'm sure everything was nearly identical.
I wonder if the USA/Canadian/European Aveo have differences in the engine bay.
I still don't understand how the coil pack is different.... I checked in the Aveo we disassembled and it looked identical to the Lanos.
Was it just the connector that was different??
Do you have a picture of the other connector??
We've allready tore apart an Aveo.... I'm sure everything was nearly identical.
I wonder if the USA/Canadian/European Aveo have differences in the engine bay.
I still don't understand how the coil pack is different.... I checked in the Aveo we disassembled and it looked identical to the Lanos.
Was it just the connector that was different??
Do you have a picture of the other connector??
- Brian5475E
- Expert
- Posts: 753
- Joined: Tue May 11, 2004 2:49 am
- Location: Cincinnati, Ohio USA
- Contact:
I didn't buy the header from shark racing. bought it from another company. but I was going by what shark racing was listiing that the header for accent for that year would fit the lanos. I will try and draw what the manifold gasket looks like
***edit** Ok I drew what my manifold gasket looks like. its not the best but will do. its in the gallery under Kalos. I'm sure it's the same as the 1.6 lanos
***edit** Ok I drew what my manifold gasket looks like. its not the best but will do. its in the gallery under Kalos. I'm sure it's the same as the 1.6 lanos
Aveo that moves! Now I need those cams!
-
- Expert
- Posts: 3052
- Joined: Fri Mar 28, 2003 3:51 am
- Location: York, PA
- Contact:
Shark Racing 4-2-1 Header
You bought the wrong header, period. They used to have a drop down menu to select with make/model the header is for.
You shouldn't have assumed that the same header would fit all those applications.
Please re-word the title of this thread so that you don't give people the wrong impression.
You bought the wrong header, period. They used to have a drop down menu to select with make/model the header is for.
You shouldn't have assumed that the same header would fit all those applications.
Please re-word the title of this thread so that you don't give people the wrong impression.
-
- All Powerful
- Posts: 2767
- Joined: Thu May 01, 2003 10:37 pm
- Location: Virginia, USA
- Contact:
-
- Expert
- Posts: 375
- Joined: Fri May 07, 2004 1:19 pm
- Location: Belgium
Yes, the 1.5 16v is also avaliable outside of korea in the Cielo/Nexia.. if i remember correctly the 1.5 is the smallest engine capacity allowed in korea... there're even Nubiras with the 1.5 16v (already came in 1.6 16v).Wolf-Spirit wrote:ah lol here i though he got it from shark racing itself... and yes they got a drop down menu idd![]()
korea has a 1.5 16v in there lanos models? ah never knew that good to know clears that up tbh cuase the never listed the 16v i though the ment a 1.5 8v wich is difrent.... so i stand corrected
Efrain.
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
146.6WHP/135lb.ft - 14.81@94mph
-
- Expert
- Posts: 375
- Joined: Fri May 07, 2004 1:19 pm
- Location: Belgium
Yes the nexia 1.5 16V is the top nexia engine we got in belgium even :s US has a more powerfull engine in it then? Never seen a nubi whit a 1.5 though.... but to be honest dont c how that car would drive well even a 1.6 is borderline for meEfrain A. wrote:Yes, the 1.5 16v is also avaliable outside of korea in the Cielo/Nexia.. if i remember correctly the 1.5 is the smallest engine capacity allowed in korea... there're even Nubiras with the 1.5 16v (already came in 1.6 16v).Wolf-Spirit wrote:ah lol here i though he got it from shark racing itself... and yes they got a drop down menu idd![]()
korea has a 1.5 16v in there lanos models? ah never knew that good to know clears that up tbh cuase the never listed the 16v i though the ment a 1.5 8v wich is difrent.... so i stand corrected
Efrain.
