Spring Break Project!!

greenbluewoo · Post by **greenbluewoo** » Thu Feb 10, 2005 5:12 am

YEAH I TRIED THAT BUT IT WONT WORK AND IT IS IN MY CHECK OUT CART BUT I DIDNT CLICK ON PROCESS ORDER YET BUT IN THE CHECK OUT THERES NO WAY TO REMOVE IT I SENT SHARK RACING A E-MAIL BUT IT CAME BACK AND SAID THAT THE E-MAIL DIDNT GET THERE SO I DONT KNOW WHAT TO DO SO I'M PROBALY GOING TO USE MY FRIENDS COMPUTER AND HAVE HIM REGISTER ACCOUNT HAVE IT SENT THERE THATS THE ONLY THING I COULD THINK OF

AcingTeam · Post by **AcingTeam** » Thu Feb 10, 2005 1:42 pm

greenbluewoo wrote:YEAH I TRIED THAT BUT IT WONT WORK AND IT IS IN MY CHECK OUT CART BUT I DIDNT CLICK ON PROCESS ORDER YET BUT IN THE CHECK OUT THERES NO WAY TO REMOVE IT I SENT SHARK RACING A E-MAIL BUT IT CAME BACK AND SAID THAT THE E-MAIL DIDNT GET THERE SO I DONT KNOW WHAT TO DO SO I'M PROBALY GOING TO USE MY FRIENDS COMPUTER AND HAVE HIM REGISTER ACCOUNT HAVE IT SENT THERE THATS THE ONLY THING I COULD THINK OF

Yeah, that's a good idea.

kinkyllama · Post by **kinkyllama** » Thu Feb 10, 2005 1:46 pm

As woohoo said, erase the cookies

that has worked for me in the pass

subachad · Post by **subachad** » Thu Feb 10, 2005 2:02 pm

delete temp internet files as well as the cookies. It's possible the page is now cached which hitting refresh 'should' fix it.

bluesheepbrian · Post by **bluesheepbrian** » Fri Feb 11, 2005 12:46 am

AcingTeam wrote:
WooHoo wrote:just do this.... pipe from the header to the back and all you would need is one bend at the header, the only problem is if you happen to bottom out. thats what i plan to do, no cats just pipe and a muffler
Also, wouldn't that trigger your CEL? Even if you drill the sensors into the pipes? I'm pretty sure it would...

Whats a CEL

AcingTeam · Post by **AcingTeam** » Fri Feb 11, 2005 2:24 am

bluesheepbrian wrote:
AcingTeam wrote:
WooHoo wrote:just do this.... pipe from the header to the back and all you would need is one bend at the header, the only problem is if you happen to bottom out. thats what i plan to do, no cats just pipe and a muffler
Also, wouldn't that trigger your CEL? Even if you drill the sensors into the pipes? I'm pretty sure it would...

Whats a CEL

Check Engine Light

AcingTeam · Post by **AcingTeam** » Sat Feb 26, 2005 2:43 pm

Okay guys,
I have finally received my items:
-Timing Belt
-Sharkracing Headers
-Ractive muffler
-Eibach Springs
-Tails
-Short Shifter from 360 Dynamics is on the way

Headers from sharkracing got here withing 2 weeks (pretty fast for shipping from Korea). They also do have a hole for one of the sensors drilled.
Have a question though... the hole is located where the red square and NOT where they have it towards the end.

The question is... does this header replace 2 or 1 of the catalytic converters?
I looked at the diagram of an exhaust a few times, but I don't think it's accurate and I'm too lazy to lift up my car... don't have time either.

Thanks guys!!

p.s. will post pics of items soon.

lanos2001 · Post by **lanos2001** » Sat Feb 26, 2005 3:12 pm

well that is one of your o2 sensors but as for the other one you will have to drill. and it replaces one catalytic converter. the one they have towards then end is probably for another application. you'll just have to measure out where to drill the other hole.

you know if you don't want to deal with it i can always buy it off of you.

nick

kinkyllama · Post by **kinkyllama** » Sat Feb 26, 2005 4:42 pm

AcingTeam wrote: -Short Shifter from 360 Dynamics is on the way

Wait did they just do one special for you or do they have a few in stock?

AcingTeam · Post by **AcingTeam** » Sat Feb 26, 2005 8:41 pm

lanos2001 wrote:well that is one of your o2 sensors but as for the other one you will have to drill. and it replaces one catalytic converter. the one they have towards then end is probably for another application. you'll just have to measure out where to drill the other hole.

you know if you don't want to deal with it i can always buy it off of you.

nick

LOL nah I think I'll deal with it. I thought that the 2nd o2 sensor is located where the 2nd cat was... I guess I was wrong... so I would have to drill another hole (I knew I had to).

AcingTeam · Post by **AcingTeam** » Sat Feb 26, 2005 8:42 pm

kinkyllama wrote:
AcingTeam wrote: -Short Shifter from 360 Dynamics is on the way

Wait did they just do one special for you or do they have a few in stock?

I was a pain in the butt so Tom did one for me... he said he will make more as soon as he finds more stock shifters

kinkyllama · Post by **kinkyllama** » Sat Feb 26, 2005 9:44 pm

damn you.

AcingTeam · Post by **AcingTeam** » Sat Feb 26, 2005 11:22 pm

kinkyllama wrote:damn you.

lol