where to get a timing belt adjuster

bigted83 · Post by **bigted83** » Fri May 18, 2007 3:33 pm

where do i get the timing belt adjuster for changing out the timing belt, do they just call the timing belt slack adjuster that or what do they call it

gse_turbo · Post by **gse_turbo** » Fri May 18, 2007 4:52 pm

are you talking about the belt tentioner for the timing belt or the adjustable cam gears?

garrett

bigted83 · Post by **bigted83** » Fri May 18, 2007 5:43 pm

the belt tensioner for the timing belt i couldn't get on at autozone or advanced auto or is it another tensioner i need?

gse_turbo · Post by **gse_turbo** » Fri May 18, 2007 6:54 pm

if you want it new, which i recomend, then it's a dealer only part.

what motor are you building?

if it's a 1.6 you can go to the formerdaewoo dealer or you can get one for the chevy aveo (not sure of the engine codes)

if it's the 2.0/2.2 the you can go to the former daewoo dealer (T22SED/T20SED), the suzuki dealer (U20SE)or the isuzu dealer (T22SE/X22SE/U22SE).

garrett

bigted83 · Post by **bigted83** » Fri May 18, 2007 7:22 pm

thanks i'll check into that tommorow hopefully it won't cost me a arm and leg, the timing belt was 60 dollars the water pump was 30 and to other belt were lie 15 together. i'll call the dealership

daewoomofo · Post by **daewoomofo** » Fri May 18, 2007 9:10 pm

ebay for the win. also i hope you got a Gates brand belt. those are the OEM and the best out there for daewoo's

gse_turbo · Post by **gse_turbo** » Fri May 18, 2007 9:33 pm

good call!

http://cgi.ebay.com/ebaymotors/1999-200 ... enameZWDVW

http://cgi.ebay.com/ebaymotors/1999-200 ... enameZWDVW

http://cgi.ebay.com/ebaymotors/1999-200 ... enameZWDVW

bigted83 · Post by **bigted83** » Sat May 19, 2007 12:58 am

i ordered that tonight

bigted83 · Post by **bigted83** » Sat May 19, 2007 8:29 pm

where can i get the tool to hold the cams still, my autozone or advanced didn't have one somebody told me i can thread bolts in to the head and that will work?

gse_turbo · Post by **gse_turbo** » Sat May 19, 2007 9:32 pm

do not use the "bolt trick". you will damage something! i.e. a cam gear.

http://cgi.ebay.com/ebaymotors/Camshaft ... enameZWDVW

http://cgi.ebay.com/ebaymotors/NEW-BAUM ... enameZWDVW

http://cgi.ebay.com/ebaymotors/Lisle-To ... enameZWD1V

http://cgi.ebay.com/ebaymotors/LISLE-DO ... enameZWD1V

all of them work the same and even if you don't get one of these of ebay, you can atleat use the pictures or part numbers to have a store like Car Quest or Napa to look them up.

you could also go to your local mechanic to see if they'll tell you when the MAC tools, Snap-On or like tool distributer will be around.

garrett