how to get the ac and serpentine belt off 1.6L lanos
Moderators: daewoomofo, Moderators Group
how to get the ac and serpentine belt off 1.6L lanos
I'm going to need to take off my crank pulley I'm not sure of the process of removing the belts. If someone could chime in and maybe tell me a few tricks to get these bad boys off that would be great.
"mess with the best die like the rest"
-
gudolegeorgiaboy
- Posts: 4
- Joined: Sun Nov 05, 2006 1:14 am
1. jack up passenger side of car
2. take off wheel
3. take off dust cover
4. loosen alternater
5. loosen a/c compressor belt tensioner
6. use inpact wrench to loosen crank shaft pully blot
7. check to see if key is in proiper position. note it doesn't stick out much and the pully drops right off. allowing the
probability of it not getting in the proper position when reinstalling it.
8. put back on using the directions you already have.
2. take off wheel
3. take off dust cover
4. loosen alternater
5. loosen a/c compressor belt tensioner
6. use inpact wrench to loosen crank shaft pully blot
7. check to see if key is in proiper position. note it doesn't stick out much and the pully drops right off. allowing the
probability of it not getting in the proper position when reinstalling it.
8. put back on using the directions you already have.