Forced/Cold Air Induction Kit question

[TheGreatAndPowerfulOz]

Yes, just drill a hole big enough to hold the AIT sensor on the bottom of the intake pipe. Don't drill the hole too close to the strut tower, or you may have a problem fitting the sensor and it's socket on the end of the wire.

I have pics posted if you want to see them.


Cliff

[daewooluvr]

Well the reason I said it wont fit is because of the placement of the throttle body on the nubira. YES it can easily be modded to fit a Lanos but a Nubi is a totally differernt story. The only thing I can think of is getting a length welded on and using one of those 90deg silicon bends as a coupler. If you look at your throttle body, you'll understand what I'm talking about.

[TheGreatAndPowerfulOz]

Oh yeah, I forgot the Nubira is like the Leganza. DUH! LOL

The throttlebody is closer to the center rear of the engine bay and the opening is facing the top.

Something that would fit the Leganza should also fit the Nubira.

[blackielaw]

Oz, what Civic intake did you get for your Lanos? any particular year / version or would anyone do?

[MMamdouh]

Well the reason I said it wont fit is because of the placement of the throttle body on the nubira. YES it can easily be modded to fit a Lanos but a Nubi is a totally differernt story. The only thing I can think of is getting a length welded on and using one of those 90deg silicon bends as a coupler. If you look at your throttle body, you'll understand what I'm talking about.

OHHH, i always do this mistake simply because the nubira here got the 1.6 DOHC engine so...

i always prefer to call engines by ther CC (1.6, 2.0, etc...) rather than the car that got the engine to prevent such confusion.

anyways in that case you will need a 90 degree adaptor to make it fit... kinda like what Kinky was having on his car.

MMamdouh

[MickeyX]

I finally finished my intake. They accidently sent me two different intakes for the same price (30 USD) The first attempt was failiure the second try looks awesome. Check it out and tell me what you think. I used the original 90 degree bend on the body. http://www.cardomain.com/memberpage/819401/3

[MMamdouh]

it looks nice man... if only you could extend the intake pipe to go into the hole and mount the filter in place of the OEM resonator, that would avoid sucking hot air from the engine bay, but still it is really cool.

MMamdouh