Hey Guys!
I need a little help here please!
2 days ago the timing belt gave up on my Lanos, I've changed it today but the engine still wont fire up. I'm pretty sure I have a few bent valves.
Can somone help me with some instructions on the cylinder head removal?
1.6L Doch Lanos changing valves
Moderators: daewoomofo, Moderators Group
Re: 1.6L Doch Lanos changing valves
I think I got it all figured out. Just finished with the cylinder head removal. As I was expecting all exhaust valves were bent. The most difficult part was removing the intake manifold, the 4 screws under the intake were very hard to reach.
Re: 1.6L Doch Lanos changing valves
Did you removed the head with intake & exhaust manifolds attached as per service manual instructions?IvanLanos wrote:I think I got it all figured out. Just finished with the cylinder head removal. As I was expecting all exhaust valves were bent. The most difficult part was removing the intake manifold, the 4 screws under the intake were very hard to reach.
Re: 1.6L Doch Lanos changing valves
I removed all the manifolds, I don't have a manual unfortunatly. 
Everything would be much easyer.
Everything would be much easyer.
?