Search found 8 matches
- Fri Feb 11, 2011 10:46 pm
- Forum: Engine/Intake/Exhaust
- Topic: 2004 optra problem
- Replies: 11
- Views: 5979
Re: 2004 optra problem
no worries. Got it running. on my engine I guess the timing marks on the cam gears go straight up and line up with some small marks on the timing belt back cover.Meaning both marks are at the 12 oclock position and the crank at the 6 oclock .also for anyone that has a small tab on the tensioner that...
- Fri Feb 11, 2011 1:24 pm
- Forum: Engine/Intake/Exhaust
- Topic: 2004 optra problem
- Replies: 11
- Views: 5979
Re: 2004 optra problem
Would laying a straight edge across them be good?
Will the engine run without the air cleaner hooked up on this car?ie throttle body not covered
Will the engine run without the air cleaner hooked up on this car?ie throttle body not covered
- Fri Feb 11, 2011 1:21 pm
- Forum: Engine/Intake/Exhaust
- Topic: Lanos will not run after rebuild from broken timing belt
- Replies: 50
- Views: 5866
Re: Re:
i currently have an identical problem on my lanos, a 2000 model, but i had a head shop do the work on the heads. i have good compression across the board, i have good fuel pressure and delivery, good spark... two questions: what is the firing order of the 2000 1.6 model, so i can check to see if th...
- Thu Feb 10, 2011 12:36 pm
- Forum: Engine/Intake/Exhaust
- Topic: Lanos will not run after rebuild from broken timing belt
- Replies: 50
- Views: 5866
Re: Lanos will not run after rebuild from broken timing belt
I know this is old post but what did the engine do when the cams were reversed? Did it back fire through the throttle body?
Trying to see if I have same problem. Lines look right but there is still an obvious problem.
Thanx
Trying to see if I have same problem. Lines look right but there is still an obvious problem.
Thanx
- Thu Feb 10, 2011 12:22 pm
- Forum: Engine/Intake/Exhaust
- Topic: 2004 optra problem
- Replies: 11
- Views: 5979
Re: 2004 optra problem
.Crank mark is small rectangle right? and it aligns with sort of arrow notch on bottom of guard pointing at floor basically this is the correct alignment diagram: http://i83.photobucket.com/albums/j319/mmamdouh/timing%20belt%20replacment/8.jpg http://i83.photobucket.com/albums/j319/mmamdouh/timing%...
- Wed Feb 09, 2011 6:10 pm
- Forum: Engine/Intake/Exhaust
- Topic: 2004 optra problem
- Replies: 11
- Views: 5979
Re: 2004 optra problem
it all looks aligned to me. tried starting it today and still backfiring(puffing)through throttle body.Actually started fire on air box. I had sprayed a bunch of throttle body cleaner in when I had intake disconnected.Could this be a cause of problem?Wires on wrong?
Hate this Car!
Hate this Car!
- Tue Feb 08, 2011 5:56 pm
- Forum: Engine/Intake/Exhaust
- Topic: 2004 optra problem
- Replies: 11
- Views: 5979
Re: 2004 optra problem
yeah tore it apart and everything is aligned right.Didn't think I could make the mistake but needed to be sure.The number one piston is at top center and all lines are aligned.Crank mark is small rectangle right? and it aligns with sort of arrow notch on bottom of guard pointing at floor basically.I...
- Fri Feb 04, 2011 5:18 pm
- Forum: Engine/Intake/Exhaust
- Topic: 2004 optra problem
- Replies: 11
- Views: 5979
2004 optra problem
Just replaced head gasket on car while doing so thought I would be smart and take all kinds of digital photos for ease of reassembly.Well things were quite easy anyway until I went to replace the cams.It turned out the camera didn't store any of the damn pics.If I am correct the cams on this car are...