The original daewootech forum

OK....so after rewiring liek 30 wires from my melted wiring harness, and fixiung the oil line..... My pump came in!, it took about ...2 hours to figure out how to mount it...then 25 minutes to run oil, then 2 hours to decide what circuit was gogin to turn it on, then 20 minutes to actually wire up. ...

Oh man, major issues going on, the turbo melted the main wiring harness that runs under the rad, I had to cut, solder and reroute about 30 wires which took a long time, but anyways, its no longer an issue because the wiring is now inside the bumper. I have an oil pump coming, I am going to put it sl...

For running the oil, I tapped a hole in my oil pan with a 1/4 npt thread and added a stainless steel nipple. I also found a large plug right behind the oil pressure sensor which i drilled and also tapped with a 1/4 inch npt thread. This bolt was notoriously difficult to tap because it was so small i...

Here is the first picture I took of when I test fitted the adaptor to make sure the turbo was orientated corectly inbetween the engine and rad. http://s3.postimage.org/vUCzi.jpg Here are some more pics of the turbo installed onto the adaptor after I finished welding it. http://s1.postimage.org/emojr...

Ok, so what kinda options do I have if I leave the map sensor and stock ecu, will ignition timing be acceptable if I use a diode on the map and it sees ampient air pressure during boos? Then I can just figure out something in paralell for mor fuel. I would like to have parts in the mail, because aft...

Ok, thats good to know before I jumped into that. How important is ignition timing? In the matter of speaking that its not perfectly adjusted the way that the ecu would like to have it timed for? Does the ECU drastically vary the timing of ignition by a large portion of crank roatation or is it like...

Hey I was seeking advice on a turbo project for the 2.0 forenza motor and I bumped into a forum meber Exist3nc3 who reffered me here. Its coming along and I'm doing all the work myself. So far I have a turbo, a bunch of plumbing bov wastegate. I have installed an intercooler and piped it to the inta...