The original daewootech forum

we have the same problem, mine is a sedan 1.6 16V, I'm going crazy.

I would like to install the kit Powerflex bushings for the MK2 Astra GSI E / Kadett E GSI, according to you are compatible? here are the codes of the bushes.

Powerflex PFR80-312
Powerflex PFF80-308
Powerflex PFF80-301
Powerflex PFF80-302

Thanks

Hi, I am interested in the quick shift kit, I wanted to know the price of shipping including in Italy, thanks.

hello friends, my problems are now worse, I now have the power outages, with ABS warning light, happens randomly, so I have to turn off the engine by turning the ignition key to the ON position and re-starting the engine, i'm go happens again the power outage.

Thanks friends, I did clean all the sensors abs, now works a little better, but the noise of the pump remained abs. my mechanic says it's changed the whole abs system, but your lanos make this noise?

Thanks

Hi friends I have a problem with the ABS system, when i pass the 10 km/h or the ABS starts working or when i stop, I hear a rattle coming from the ABS system, this noise can not remember if there ever was, also your Lanos ABS makes the same noise or is it just my problem ? The abs function properly,...

I will do some test driving, of course, the adjustment will be made ​​by eye and checking the spark

In fact, I just bought a pressure regulator.

The main problem of lanos is the lack amount of fuel injected, there is more air than fuel, i have a 1.6, now I bought the fuel pressure regulator. i try!

Uhmmmm ok and if install a malpassi 1:1 fuel regulator ?

Is not change nothing, this is my problem

Ahahahahahahah the two big keys is keys of my home, ahahahahah

Hello my friends,

have a problem with a new set of Daewoo Leganza 2.2 injectors, in practice is not changing absoluty nothing, this is my situation, have a original Fuel Pressure Regulator and a commercial Fuel Pump. where the problem, but the car work perfectly.

Thanks.

P.S.

Have 1.6 Lanos.

remove the dash panel is not simple, but reassemble it really easy, now I show you my current situation,I removed some of the cables, I covered the wires with new isolant tape and locked the cables with plastic strips, where the cables touched the body and bar I added a particular rubber to prevent ...