Search found 9 matches
- Thu Nov 01, 2007 10:02 pm
- Forum: Engine/Intake/Exhaust
- Topic: Crankshaft won't turn!
- Replies: 11
- Views: 1442
Yeh , I own both a Lanos and Leganza, The leganzas timing is actually set on the tensioner itself the water pump gets locked into a fixed position. Yes, I am using the service manual, I try to be as meticulous as possible in terms of following it to the T. Probably more than I should be I just can't...
- Wed Oct 31, 2007 8:56 pm
- Forum: Engine/Intake/Exhaust
- Topic: Crankshaft won't turn!
- Replies: 11
- Views: 1442
So I got the timing belt on yet I am having the same problem as the guy below. The Pointer moves after its been aligned and the bolt is been tightened. THe difference from the lanos is the tensioner has its own key that you turn in order to align the pointer much easier than the lanos, and then you ...
- Tue Oct 23, 2007 4:19 pm
- Forum: Engine/Intake/Exhaust
- Topic: Crankshaft won't turn!
- Replies: 11
- Views: 1442
So I took the advice of an old mechanic and he said to use ATF fluid and let it sit and then slowly press on the cylinders until they move then coat them and repeat, so i got them moving and thier appears to be no cylinder wall scoring and they are in good shape. I cleaned them all out and swabbed t...
- Fri Oct 19, 2007 2:49 am
- Forum: Engine/Intake/Exhaust
- Topic: Crankshaft won't turn!
- Replies: 11
- Views: 1442
Well I went ahead and put the mix in I'll let it sit for a while and see what happens. Now let me ask a dumb question, why would it matter if the car was in park or not? It's an automatic, the transmission was in neutral and the parking brake was off when I did it, just trying to figure out why that...
- Fri Oct 19, 2007 2:10 am
- Forum: Engine/Intake/Exhaust
- Topic: Crankshaft won't turn!
- Replies: 11
- Views: 1442
- Thu Oct 18, 2007 8:56 pm
- Forum: Engine/Intake/Exhaust
- Topic: Daewoo Leganza replacing head?
- Replies: 5
- Views: 871
- Thu Oct 18, 2007 8:53 pm
- Forum: Engine/Intake/Exhaust
- Topic: Crankshaft won't turn!
- Replies: 11
- Views: 1442
Crankshaft won't turn!
So I have a 1999 Daewoo Leganza and I took the head off and thier doesnt appear to be any rust just some carbon deposits. So I tried to get the crankshaft to turn by putting a breaker bar on the outside pulley bolt and got nothing. Am I screwed as in something is seized up, it's been sitting for 2 y...
- Tue Oct 09, 2007 6:02 pm
- Forum: Engine/Intake/Exhaust
- Topic: Daewoo Leganza replacing head?
- Replies: 5
- Views: 871
Head
So I did a little bit more research to get that stuff from a Isuzu dealer would be around 600 dollars. Still too much I found a place where I can get a GATES timing belt for 30 bucks, Then I figured I could swap it out with the ebay kit. I'm still not sure about the head gasket kit, I think I could ...
- Sun Oct 07, 2007 5:50 pm
- Forum: Engine/Intake/Exhaust
- Topic: Daewoo Leganza replacing head?
- Replies: 5
- Views: 871
Daewoo Leganza replacing head?
So I've been searching for a while and have been unable to find an answer to my questions. I have a 1999 Daewoo Leganza Sx from which the timing belt broke. I have ordered a new head but need some help on some other parts. I went to my dealer and for the parts timing belt water pump pulleys and gask...