Search found 12 matches
- Tue May 14, 2013 2:39 am
- Forum: Transmission/Clutches/Brakes
- Topic: Lanos won't upshift
- Replies: 2
- Views: 3283
Re: Lanos won't upshift
what country are you in? have you tried a former Daewoo dealer or suzuki dealer if you're in the US? have you tried a Chevy dealer if you're in canada or europe? A shop specializing in transmission repair may be able to read codes.
- Mon May 13, 2013 11:43 pm
- Forum: Transmission/Clutches/Brakes
- Topic: squeeling brakes turned to grinding and bad rotor
- Replies: 5
- Views: 3232
Re: squeeling brakes turned to grinding and bad rotor
and for people that may view this later, everyone seems to think that the oblong cutouts in the rotor is a wire stuck in there, they are supposed to be there and were put there by the manufacturer. These are the rotors I purchased last time: http://www.amazon.com/gp/product/B000IY9YM8/ref=oh_details...
- Mon May 13, 2013 11:36 pm
- Forum: Transmission/Clutches/Brakes
- Topic: squeeling brakes turned to grinding and bad rotor
- Replies: 5
- Views: 3232
Re: squeeling brakes turned to grinding and bad rotor
The left pad is from the outside of the rotor, the right pad is from the inside of the rotor on the same wheel! I did my pads and rotors last weekend because I didn't want my caliper to seize from being over extended/ That happened to a buddy of mine, he couldn't move AT ALL, luckily it happened in ...
- Tue May 07, 2013 7:56 am
- Forum: Transmission/Clutches/Brakes
- Topic: squeeling brakes turned to grinding and bad rotor
- Replies: 5
- Views: 3232
Re: squeeling brakes turned to grinding and bad rotor
The noise was intermittent and I had multiple look and could never find a problem and just said, "Ya, some brakes bads just do that". Wouldn't a seized caliper have more effect than just a tiny bit of noise only some times? It never seemed to slow the car down any. My buddy had a seized caliper and ...
- Tue May 07, 2013 6:46 am
- Forum: Transmission/Clutches/Brakes
- Topic: squeeling brakes turned to grinding and bad rotor
- Replies: 5
- Views: 3232
squeeling brakes turned to grinding and bad rotor
my rear breaks had been squealing on and off while driving for a while now. I couldn't figure out why, I had my brakes done about a year ago and it had been happening since then (maybe before as well, can't remember). Well, I started to now hear a terrible grinding noise, sometimes when I'm braking ...
- Sat Feb 16, 2013 1:50 am
- Forum: Detailing/Exterior/Suspension
- Topic: leak/water in with spare tire (Nubira 02 Wagon)
- Replies: 3
- Views: 3076
Re: leak/water in with spare tire (Nubira 02 Wagon)
I'm not sure I understand where the water was coming in. What two piece of metal needed to be sealed? did you need to take off the plastic around the bottom that the trunk seal is attached to?
- Fri Feb 15, 2013 10:06 pm
- Forum: Detailing/Exterior/Suspension
- Topic: leak/water in with spare tire (Nubira 02 Wagon)
- Replies: 3
- Views: 3076
leak/water in with spare tire (Nubira 02 Wagon)
was doing a little work on my car and flip up the spot I put some tools in the trunk (the little flip up section between the spare tire and the bumper) and found a little water damage and some parts of my tools were a little rusty (like screwdriver bits). flipped up the section where the spare tire ...
- Thu Jan 24, 2013 6:15 pm
- Forum: Transmission/Clutches/Brakes
- Topic: how to tell if GM or MF trans or Z vin? (Nubira)
- Replies: 4
- Views: 3300
Re: how to tell if GM or MF trans or Z vin? (Nubira)
Ok, so Z vin just means 2.0L which is what I have, good. Still need to tackle the radiator hose though. I had looked at Option Codes link and Abbreviations link and they didn't have the P/CD stuff in it, didn't click on legend, which says this about it: P/CD This column indicates related part identi...
- Thu Jan 24, 2013 8:25 am
- Forum: Transmission/Clutches/Brakes
- Topic: how to tell if GM or MF trans or Z vin? (Nubira)
- Replies: 4
- Views: 3300
how to tell if GM or MF trans or Z vin? (Nubira)
How can I find out which trans I have other than auto? and what does z vin mean? My Vin has a z in the middle, is that all this means? I have a 02 Nubira 2.0L that I need to get radiator hoses and spark plug wires for. Looking over at rockauto.com they list different hoses and spark plug wires depen...
- Fri Jun 08, 2007 6:30 am
- Forum: Detailing/Exterior/Suspension
- Topic: where can I get replacement lower control arms for Nubira
- Replies: 3
- Views: 1017
I may have found some... http://www.rockauto.com/dbphp/mfr,WALKER,Emission,5132,Oxygen+Sensor if you go to daewoo -> 2002 -> Nubira -> 2.0L -> Suspension -> Ball Joint. It says they have the ACDelco parts and they have one of the third party Spicer brand parts but not the other one. Anyone know if t...
- Fri Jun 08, 2007 6:01 am
- Forum: Engine/Intake/Exhaust
- Topic: o2 sensor and camshaft position sensor are bad on my Nubira
- Replies: 1
- Views: 618
o2 sensor and camshaft position sensor are bad on my Nubira
I have a Daewoo Nubira CDX Wagon 2002. it seems like my car's falling appart. I need a new right and left lower control arm (posted about that here ), which made me need two new front tires as well. I also need o2 sensors and camshaft sensor. I went to an authorized Daewoo mechanic and they checked ...
- Fri Jun 08, 2007 5:42 am
- Forum: Detailing/Exterior/Suspension
- Topic: where can I get replacement lower control arms for Nubira
- Replies: 3
- Views: 1017
where can I get replacement lower control arms for Nubira
I have a Daewoo Nubira CDX Wagon 2002. Both my lower control arms are bad and so far I've been unable to source replacements. Does anyone know the model numbers for them or if I can order them straight from Daewoo? I can't find them on the parts webpage at www.daewoous.com I can find the control arm...