The original daewootech forum

Ok. problem.. The timing is correct. But my MAP reading for inches of vacuum is only 20 at idle and I'm pretty sure it should usually be about 28-30 inches. The cams I got are 260* duration and .410" lift. Is that a much bigger cam than what was in it before? They are supposed to be mild cams. I'm a...

are you using aftermarket engine management?

http://img.photobucket.com/albums/v370/decyphex1024/th_firststart.jpg At this point, it was running real rich and there was no exhaust, just the manifold. The daewoo injectors were in it and supposedly they are SFI injectors so they pump out much more fuel. So that was my problem, I put the sunbird...

alright... Welll.. I'm not getting idle! It will not idle, just cuts out. The MAP seems to be fine, the O2 seems to be fine. I'm still using the IAC from the daewoo. Should I be using the one from the sunbird (if it fits? The plugs are the same). I was also thinking it could be that little screw on ...

it runs!

Haha, me and my cheap PVC intakes.

Looks good!!! I just did go through this stage of the swap LOL I know its a lot of work ;) What plug wires are u using? Thank you. Yes, it is a lot of work. I was meaning to ask you something too, what is that blue thing connected to your throttlebody with the gauge on it? Plug wires.. 7mm Platinum...

http://www.silencefading.com/bah/100_1818copy.jpg http://www.silencefading.com/bah/100_1820copy.jpg About to go in. http://www.silencefading.com/bah/100_1825copy.jpg :) http://www.silencefading.com/bah/100_1827copy.jpg http://www.silencefading.com/bah/100_1831copy.jpg My modified pieces for differe...

http://www.silencefading.com/albums/userpics/10001/100_1793_copy.jpg http://www.silencefading.com/albums/userpics/10001/100_1795_copy.jpg http://www.silencefading.com/albums/userpics/10001/100_1796_copy.jpg http://www.silencefading.com/albums/userpics/10001/100_1805_copy.jpg http://www.silencefadin...

got the old motor out today.

Yeah, they've been ported and Im going to do some porting and maybe polishing of my own. 3 angle valve grind (not really performance) 25 thousandths of an inch have been decked off the head to increase compression and the performance cams. I'm redoing my ports to look like gsi_turbo's ports. I'm mod...

Got my stuff back from the machinist. Here's some pics: http://www.silencefading.com/albums/userpics/10001/100_1693_copy.jpg http://www.silencefading.com/albums/userpics/10001/100_1697_copy.jpg http://www.silencefading.com/albums/userpics/10001/100_1698_copy.jpg http://www.silencefading.com/albums/u...

Looks excellent!! GREAT PROGRESS! I can't wait for this to be done, it's going to be FASSSTTT! If you can, post some videos when it's done, I'd love to see it in action.

bump. No response sucks.