The original daewootech forum

very nice pics, i's a good thing that it was just the CV, did you do the test I mentioned or was it obvious from just looking at it? Garrett lol in a sense yeah i put the car up on one side and moved the wheel side to side only to hear metal grinding and slipping after further inspection the only t...

So after turboing the lanos some re-used head bolts had made my head gasket blow from the extra pressure. Pissed off and out of luck i went to daft art and myself some arp head studs and a cometic mls head gasket. After driving and testing the car runs unbelieveably no more burnt oil smoke or wierd ...

Yeah you are going to want to remove the pipe that the second cat is attached to and bang it on the ground so that all the material from your first cat is not blocking the second cat which in turn gives loss of power and possibly a situation in which the backpressure is so high that it breaks your e...

lol if you guys look at my pics you can see the melted plastic from my o2 sensor wire sleeve on my exhaust manifold. Im going to have to re route my oil line as well because it is right in the line of fire. As a side note i havent detonated at all under boost with the regulator i got even with the r...

Yes yes i know but im not too worried about it. I dont have the IAT sensor in the piping ive got it hanging in the hole from my old intake, and i will be intercooling it when im running more boost but right now im boosting 4 psi with spikes to 5 and i havent heard a single detonation, if i do believ...

Ok well the pictures are on my cardomain page just because i dont have time to post them here. my page is in my sig

Yup its been about 15 hours now of hard work, sweat, lots of blood, and cigarettes but i think i am finally done. Everythings installed but i now have 2 roadblocks..... A. My oil sandwich comes in about 12 hours and i pray this one will work, and B. I think i am going to be afraid to start the car i...

Can anyone get me some pictures of their turbo's lanos im trying to figure out what to do with my exhaust but i have no idea. I am planning on taking the cat off and cutting off both flanges then welding a pipe to a turbo adaptor. and one to the flange that i cut off and connects to the manifold, th...

Anybody who has installed this i wanted to know which one to buy and what you did to instal it i know that its under the bench seat and you twist off that cap to get to it but i want to know if just need the universal one or there is one from another car that will basically "Bolt on" without much ha...

if your car is an auto you have the 4t40e tranny. as long as you dont drive "balls out" all day every day you should have no problems. its rated at 325 ft lbs of torque, so you should be golden for a while as long as your not an ass all of the time Thats actually really good to hear, I can't drive ...

Turbo Thats what i plan on using. I don't really understand what that is, that meth alchohol thing is it used to further cool the intake air in order to keep things a little colder? I think you are right about the piggy back i was going to look into them and i was looking at the emanage but dont kn...

I'd disagree with Ant DX316.... the intercooler should be your least concerning part..... some turbo engines ( like the C20GET ) aren't even intercooled. I really don't like the word "BIG" when people describe intercoolers.... it's possible to go too big and actually hurt your performance ( since t...

Well its turbo time for my lanos and I was wondering what is a safe amount of boost to run in the 1.6 DOHC. Im buying a TD04 turbo along with various things like a fuel pressure regulator, manual boost controller, and a boost guage. What should i expect to gain out of it? Im doing this all for one t...

there is actually a fuse in the engine bay that helps for the brake light fuses. it is a strange wiring but only certain ones worked but when I replaced the fuse I had no problem. Yup yesterday i blew a fuse for my right front signal and all of my brake lights and tail lights went out except for on...

HI again now my brake lights dont work, My high mount stop and my left and right lights (on the trunk lid) do not light up when i hit the brakes but when i turn on the lights they do work. now my tail lights do work when i press the brake ive checked all fuses to see if something is cross wired and ...