Search found 5 matches

by tgs2101_765
Fri Feb 20, 2009 3:15 am
Forum: Detailing/Exterior/Suspension
Topic: Lanos Camber Adjustment?
Replies: 0
Views: 341

Lanos Camber Adjustment?

He guys. I have a 2001 Lanos and I just traded the 15" wheels I had straight up for 17". The inside had bad wear on my old ones so the camber is off pretty bad. Does anyone know of a camber kit for this car? I need to adjust the front bad.
by tgs2101_765
Tue Feb 17, 2009 1:20 pm
Forum: Engine/Intake/Exhaust
Topic: Just finished Timing belt 1.6 Lanos
Replies: 2
Views: 309

Just finished Timing belt 1.6 Lanos

Hey guys, I just swapped the Timing belt, water pump, auto tensoner, and idler pully on my timing system. I've done the timing on a Honda with a manual tensioner (which I perfer personally) and a balance shaft belt. I personally am a little paranoid about the auto tensioner. I followed all of the pr...
by tgs2101_765
Mon Feb 13, 2006 12:18 am
Forum: Transmission/Clutches/Brakes
Topic: klunky shifting and jerking
Replies: 10
Views: 1409

MMamdouh,

I don't know how many miles are on this clutch. but I can tell you that the car was in West Virginia mountains and I have never seen so much mudd caked under a car. 1/4 to 1/2 inch all underneath. Given this info, I would say it was driven hard and spun out a lot.
by tgs2101_765
Mon Feb 13, 2006 12:13 am
Forum: Transmission/Clutches/Brakes
Topic: klunky shifting and jerking
Replies: 10
Views: 1409

I got a chilton manual for this car from the library, but it isn't very informative. where is the drain plug, and fill hole for this manual transmission? I'll try the 75W synthetic oil, and report back. Today I discovered that the drivers side upper strut mount is broke, and the bearing for that sid...
by tgs2101_765
Sat Jan 21, 2006 11:20 pm
Forum: Transmission/Clutches/Brakes
Topic: klunky shifting and jerking
Replies: 10
Views: 1409

klunky shifting and jerking

Our 2002 Daewoo Lanos 5 speed shifts jerky or klunky from 1st to 3rd, then short of smooths out between 4th and 5th gear shifting. Anyone know what causes this? It sort of feels like there is play in the flywheel or something, is the best I can explain it. I checked the motor mounts and they appear ...