group buy! Wiseco Pistons (2.0/2.2 AND 1.6) (DOHC AND SOHC)

gse_turbo · Post by **gse_turbo** » Fri Jan 18, 2008 9:19 pm

I'll be placing a big order with Wiseco Pistons.

Normal MSRP on a full set of custom Wiseco pistons with pins and rings is $700.00 shipped.

I will be taking orders for a one time price of $520.00 shipped.

you can choose any bore you want, any compression ration.

the final order will be their minimum of $10000.00 (15 sets) all I need is 5 sets to finish the order.

this will be the ONLY option for high quality custom pistons unless someone else can do better, and trust me I've contacted EVERY company that is worth speaking to and this is the best price ANYWHERE!

after the group buy is over the price will go back up to $600.00 (not sure if I can include shipping into that).

gse_turbo · Post by **gse_turbo** » Fri Jan 18, 2008 9:28 pm

just as a side note IPP (the 'cheapest' place for parts) lists pistons for the 2.0 DOHC for $520+$80(for rings)+shipping for well over $600US.

• IPP also offers a very limited selection of bores and CRs
• they DO NOT offer pistons for the 1.6 or 2.0 SOHC

Slammed · Post by **Slammed** » Fri Jan 18, 2008 11:28 pm

damn I just traded my woo >O(

gse_turbo · Post by **gse_turbo** » Sat Jan 19, 2008 12:22 am

darn! it's never too late to buy a new one!

gse_turbo · Post by **gse_turbo** » Tue Jan 22, 2008 10:06 pm

WHERE IS EVERYONE!?

gse_turbo · Post by **gse_turbo** » Wed Jan 23, 2008 12:59 am

AS AN ADDED INSENTIVE...

I'll give the Ajusa MLS head gaskets for the Z20 at a better than ever price!
.051 thick... retail price $110.00, DAE price $95.00, WITH PISTONS $80.00

greenbluewoo · Post by **greenbluewoo** » Wed Jan 23, 2008 6:43 pm

I am interested in this I just have to see how much my check is this week because I just bought about $2000 worth of stuff last tuesday and I will let you no if I am going to buy it

gse_turbo · Post by **gse_turbo** » Wed Jan 23, 2008 7:00 pm

sounds good. there is no real rush I'm sure I wont be collecting money for a couple more weeks.

greenbluewoo · Post by **greenbluewoo** » Wed Jan 23, 2008 7:42 pm

ok sounds good

gse_turbo · Post by **gse_turbo** » Wed Jan 30, 2008 7:09 pm

Well just to keep everyone from having to wait longer than necessary I will start "officially" collecting on Tuesday, Feb the 4th (closed Sunday and Monday) and the dead line will be Friday, Feb 29. Early payment are also going to be excepted.

Your order will be started the day that the payment is cleared so the sooner the better.

c02one · Post by **c02one** » Thu Jan 31, 2008 6:31 am

can they make slipper pistons, like the ones sbd motorsports produces

gse_turbo · Post by **gse_turbo** » Thu Jan 31, 2008 5:41 pm

Sure thing, if that is what you are after I would have to send them and "analog" of the combustion chamber but that is no problem.

What motor would you need them for?

woodae · Post by **woodae** » Thu Jan 31, 2008 9:37 pm

can u get some for a 1.5l lanos

gse_turbo · Post by **gse_turbo** » Thu Jan 31, 2008 10:18 pm

I can have them made but I would need a sample piston to send in to get all the specs done. do you have or know someone that has a set of pistons? even a slightly damaged piston would do.

c02one · Post by **c02one** » Fri Feb 01, 2008 7:27 am

i'm looking for the T20SED, and another thing how those headers coming along.

on your old lemans did u use the stock fuel rail w/fuel pressure reg., but changed the injector.

the reason i ask is cus im planing a mild NA build-up since it will need a rebuilding soon. im looking for a maximum figure of 250hp.

i'm planing I.T.B.,port and polishing, cams, headers and exhaust, convert all bolts to ARP, girdle, and aluminum oil pan.
i'm thinking of changing the compression to the euro spec, but i'm afraid it wont pass emissions, what do u think?