parts request & new product previews

gse_turbo · Post by **gse_turbo** » Mon Jul 14, 2008 5:00 pm

sorry, Danny picked up the final protoype. I have a few more waiting to get some assembly. I also need to figure final pricing.

gse_turbo · Post by **gse_turbo** » Sat Aug 16, 2008 4:44 pm

a few new products to add to the list

got some oil cooler plates in, it took a little effort to find the right one, I'll actually add these to the site once the car is done and I have more time for an product update. ...keep in mind that they wont come red, just wanted to paint mine

got the head cleaned up a little and got one of our new products on

the factory 9.9 grade torks bolts are ok but these are 12.9 grade stainless cam cap studs and nuts, not a set price yet but once the car is done I'll get back to adding new products to the site.

and here are some pics of my valve cover and another part I plan to add to the site very soon, a carbon fiber spark plug cover

Garrett

kinkyllama · Post by **kinkyllama** » Sat Aug 16, 2008 7:59 pm

How much is the spark plug cover going to run?

gse_turbo · Post by **gse_turbo** » Sat Aug 16, 2008 8:06 pm

kinkyllama wrote:How much is the spark plug cover going to run?

it's going to depend on how many I can do at a time and what all the materials will cost at the time I do them (commodities

)

I'd like them to be in the $50-$65 range, that would be with whatever would be wanted for decals ("opel ecotec", "daewoo"...) and and most any color. not haning anything on there wouldn't change the price.

Garrett

mocpac · Post by **mocpac** » Sat Aug 16, 2008 11:00 pm

nice...

kinkyllama · Post by **kinkyllama** » Sat Aug 16, 2008 11:07 pm

When I can get some extra cash togather could I get two that said Kinky Motorsports?

gse_turbo · Post by **gse_turbo** » Sat Aug 16, 2008 11:09 pm

mocpac wrote:nice...

thanks!

kinkyllama wrote:When I can get some extra cash togather could I get two that said Kinky Motorsports?

without a doubt!

kinkyllama · Post by **kinkyllama** » Sun Aug 17, 2008 2:45 am

gse_turbo wrote:
kinkyllama wrote:When I can get some extra cash togather could I get two that said Kinky Motorsports?
without a doubt!

Awesome

gse_turbo · Post by **gse_turbo** » Tue Aug 19, 2008 7:18 pm

no pics but just added ARP rod bolts for the 1.4,1.5 and 1.6 small block 8v and 16v motors as well as head studs for the 1.6 16v motor.

Groeten

Garrett

Pir0 · Post by **Pir0** » Tue Aug 19, 2008 7:27 pm

Some really nice new stuff on the way then?

Would you be making redtop spark plug covers too? Would love one that says daewoo on it

gse_turbo · Post by **gse_turbo** » Tue Aug 19, 2008 7:51 pm

Pir0 wrote:Some really nice new stuff on the way then?

Would you be making redtop spark plug covers too? Would love one that says daewoo on it

I imagine I could do that, I would just need an original

Garrett

gse_turbo · Post by **gse_turbo** » Tue Aug 19, 2008 10:58 pm

they've always been available but finally have them added to the site... 9.0" (228mm) carbon/kevlar clutch kit for pot style flywheel

Pir0 · Post by **Pir0** » Wed Aug 20, 2008 10:27 am

I wish I had some more money about me, causse there's some really tasty stuff about your site these days Garrett

gse_turbo · Post by **gse_turbo** » Wed Aug 20, 2008 4:37 pm

thanks! trying to grow the best we can.

cheers

gse_turbo · Post by **gse_turbo** » Tue Aug 26, 2008 5:23 pm

more new goodies that will be added to the site very soon!

oil supply lines for the 1.8, 2.0 and 2.2 8v and 16v from all years.

it will include all the fittings for a direct fit as well as the braided stainless length that would come from the hard line to the turbo.

and now ALL pistons sold will come with the hi performance skirt coatings at no additional charge.