Whats the size of lanos front door speakers?

Here you will find general facts about Daewoo Vehicles

Moderators: daewoomofo, Moderators Group

Locked
MMamdouh
Moderator
Posts: 7299
Joined: Wed Feb 18, 2004 8:33 am
Location: Cairo, Egypt
Contact:

Whats the size of lanos front door speakers?

Post by MMamdouh »

i know this might have been asked many times before but i got to be sure as i am considering a 5 1/4 inch KENWOOD speakers... is that the correct size for the front door speaker of a lanos??

MMamdouh
Last edited by MMamdouh on Fri Jan 19, 2007 3:46 pm, edited 1 time in total.
Driving is the utmost fun you can have with your pants on!
Check out my ride: http://www.cardomain.com/ride/567267
Image
TheGreatAndPowerfulOz
All Powerful
Posts: 2767
Joined: Thu May 01, 2003 10:37 pm
Location: Virginia, USA
Contact:

Post by TheGreatAndPowerfulOz »

Stock door speakers are 4 inch and you have to make an adapter ring to fit the 5 1/4 inch.
It is MUCH easier to fit 5 1/4 inch than it is to fit 6 inch.

I used the factory plastic speaker holder and traced around it on 3/4inch thick MDF then drew in the circle of the size the 5 1/4 inch speakers needed and then cut it all out.

I have pics somewhere. Finding them is the difficult part. :lol:
jorge
Expert
Posts: 1819
Joined: Wed Apr 27, 2005 2:25 am
Location: Corozal
Contact:

Post by jorge »

I have in my car 6.5 speaker I use Pioneer speakers because the deep of this speaker is 1 3/4. I use a .5 spacer. I buy it in a sound center. Is plastic. Image
Con mas mec.s que un taller jajajajaja Mec. Diaz, Mec. Cheo Racing, Mec. eljunito, y ed flash tunning simplemente los mejores!
Image
ubuyau
Expert
Posts: 686
Joined: Fri Nov 01, 2002 10:16 am
Location: Australia
Contact:

Post by ubuyau »

Yes depth is the problem...

I have had some 6inch Kenwood Component Speakers for a while now but they are thin speakers... (i think something like 57mm from a bad memory :lol:)

3/4 or 1inch thick MDF spacer ring is your friend! Mine were still able to fit under the normal door trim! :shock:

--Tim
woo
Expert
Posts: 769
Joined: Fri Sep 10, 2004 12:12 pm
Location: AUSTRALIA

Post by woo »

it seems like speakers are such a hassle in lanos's. I somewhat think i was lucky inheriting a leganza because it had 6.5' splits stock, so there were no dramas fitting my clarion splits
330w carbon kevlar
Image
you'd better believe thats a paddlin

"a woman is like a refridgerator, bout 6ft tall, 300 pounds........."
TheGreatAndPowerfulOz
All Powerful
Posts: 2767
Joined: Thu May 01, 2003 10:37 pm
Location: Virginia, USA
Contact:

Post by TheGreatAndPowerfulOz »

I fit 6 1/2 inch CDT component (split) speakers in my Lanos in the stock locations under the door panels. All I needed were MDF spacer rings.
The bottom of the door panel does not fit against the door any more; there is a 1/2 inch gap, but no one can see unless you look up from under the door.
daewoomofo
Moderator
Posts: 4795
Joined: Fri Nov 18, 2005 1:41 am
Location: 313

Post by daewoomofo »

or you could mount the speakers through the door pannel, like i did, you cut the stoick meshing out and screw the speaker with its speaker cover that it came with right to the out side of the door pannel. really easy and no need to make mdf rings, it looks good too!
Image

Help keep Daewootech spam free, reply "Killspam" (no spaces) to spam posts

yeah i cant type, so what big freaking deal!
barry
Posts: 4
Joined: Wed Feb 27, 2008 7:32 am

Post by barry »

i imagine that also buys you an extra 1/2 of mounting depth too.
gawa
Posts: 10
Joined: Tue Nov 22, 2011 11:41 pm

Re: Whats the size of lanos front door speakers?

Post by gawa »

How Do you take the Plastic Panel Off, There is no screw for the Door handle. Do you just pop it off with a flathead?
benzino
Expert
Posts: 1530
Joined: Sun Mar 09, 2008 4:14 am
Location: Snowy Mountains, Australia

Re: Whats the size of lanos front door speakers?

Post by benzino »

yes
~2.0L Lanos~EHPAS~H&R Springs~KYB/GTS Shocks~
Image
gawa
Posts: 10
Joined: Tue Nov 22, 2011 11:41 pm

Re: Whats the size of lanos front door speakers?

Post by gawa »

Awesome Thanks. I couldn't Figure that part out for a long time!
Locked