daewooluvr wrote:
Lanos Fuel Rail, FPR, SS Braided hoses
AEM Fuel Pressure Regulator w/ Gauge
Stainless Steel Braided fuel lines
Polished Fuel Rail
Paid over $300 for all the lines, fittings, FPR, and gauge.
Make Offer
daewooluvr wrote:
Leganza Grill
make Offer
daewooluvr wrote:
Lanos Grill
Make Offer
daewooluvr wrote:
Lanos 1.6L DOHC Engine
Not included from this picture:
Exhaust Manifold
Valve Cover
Coil Pack
Front Motor Mount Bracket
Rear Motor Mount Bracket
Thermostat
Power Steering Pulley
Exhaust Bracket
Intake Manifold Bracket
Make Offer
daewooluvr wrote:
Lanos Lower Alternator Bracket
Powder coated metallic silver
Make Offer
daewooluvr wrote:
Lanos Power Steering Pulley - Show Quality
Powdercoated shimmering candy blue
Make Offer
daewooluvr wrote:
Lanos Intake Manifold bracket - Show Quality
Powdercoated shimmering candy blue
Make Offer
daewooluvr wrote:
Lanos Exhaust Bracket
On the bottom of the engine block.
Powdercoated metallic silver
Make Offer
daewooluvr wrote:
Lanos Front Motor Mount Bracket
Powder Coated Shimming Candy Blue
Make Offer
daewooluvr wrote:
Lanos Thermostat - like new
Make Offer
daewooluvr wrote:
Lanos P&P Exhaust Manifold
Ceramic Coated
Port matched and polished
Make Offer
daewooluvr wrote:
Custom Lanos Valve Cover
Powdercoated sky blue with metalic silver lettering.
Make Offer
daewooluvr wrote:
Lanos Coil Pack Mounting Plate
Buy to paint or customize.
Make Offer
daewooluvr wrote:
Lanos EGR Valve
Make Offer
daewooluvr wrote:
Lanos Fuel Rail, FPR - Stock
Make Offer
daewooluvr wrote:
Lanos Timing Idler and Pulley
Removed from newer engine (roughly 10K miles)
Make Offer
daewooluvr wrote:
Lanos interior door handle trim
Silver Carbon Fiber trim
Make Offer
Lanos Thermostat
daewooluvr wrote:
Make Offer
daewooluvr wrote:
Lanos AC Bracket and Pulley
Make Offer
daewooluvr wrote:
Lanos Factory Jack
Make Offer
daewooluvr wrote:
Lanos Intake Manifold bracket
Make Offer
daewooluvr wrote:
Lanos Power Steering Pulley
Buy to paint or customize.
Make Offer
daewooluvr wrote:
Lanos Crank Position Sensor
Removed from one of my old engines so I know it worked.
Make Offer.
daewooluvr wrote:
Lanos Auto Trans Filter
Bought this filter kit a while ago but never used.
Make Offer
daewooluvr wrote:
Lanos Ashtrays (2)
Use these to replace your worn/broken ashtray or use to modify for custom functionality.
Will sell together or separately.
Make Offer
daewooluvr wrote:B Lanos Valve Cover Gasket new
ought this but never installed it.
Make Offer.
daewooluvr wrote:
Lanos Intake Manifold Gasket new
Bought this but never used it.
Make offer
daewooluvr wrote:
Lanos Engine Hoist Brackets
Powdercoated shimmering candy blue
Used by a cherry picker to pull the engine out.
Make Offer.
daewooluvr wrote:
Lanos Starter
Ceramic Painted
Make Offer
daewooluvr wrote:
Lanos Intake Manifold Show Quality
Ported and Polished
Powdercoated metalic silver and shimmering candy blue
Make Offer
daewooluvr wrote:
Lanos Alternator w/ Bracket
Alternator is ceramic painted
Bracket is powdercoated shimmering candy blue
Make Offer
daewooluvr wrote:
Lanos AC Bracket and Pulley - show quality
Powdercoated metalic silver and shimmering candy blue
Make Offer
daewooluvr wrote:
Lanos Crank Pulley - Show Quality
gse_turbo wrote:does the engine run? what kind of condition is it in?
also, the part you have listed as the rear motor mount is the lower alternator bracket.
Garrett
I bought it before I got the hatchback to put into the white sedan I had before I got rid of it.
It was guaranteed to run and I was told it has 32K miles on it. It has been sitting in storage for almost 2 years though. I do go in and manually crank it every so often and put a few drops of oil in the cylinders so the rings don't dry-rot.
wolfsreign wrote:CAI how does it sit? it looks like it goes into the hole into the wheel well?
the valve cover gasket.. missing the 2 bumps on the passenger side? and is it upside down T or just | ??
~wolf
The CAI goes down into the wheel well. It is braced off one of the existing studs that the original airbox used.
As for the valve cover gasket, if you look at the picture you can see the two bumps are there. It's all one piece.
Not sure what you mean by a T or an I ? I purchased this for a 2000 Lanos.
mhmm.. gross no ty on the CAI
the valve gasket.. the one i got when i rebuilt my engine is a | type.. the stock gasket was an upside down T . yours looks like a T but i cant tell from the shadow.. and the two little bumps, i mean are the fat plugs near the coil pack. they dont seem to be attached to the gasket in the picture....
~wolf
Death smiles at man, all man can do is smile back.
