vaccum lines

REY04 · Post by **REY04** » Sat Sep 08, 2007 10:53 pm

I am still on the process of restoring everything in my car and i have found this two unusual vaccum tube inlets that i'm wondering on what would be its use. can you help me guys restoring these tubes? where does this go? pls see the picture for your reference. its in my intake manifold.

REY04 · Post by **REY04** » Mon Sep 10, 2007 5:26 am

anyone in here?

mohsen · Post by **mohsen** » Mon Sep 10, 2007 10:10 am

the smaller is plugged (dead end) and the bigger concern the hose coming from the breath hose ( the breath hose conect the cam cover and the air inlet)

MMamdouh · Post by **MMamdouh** » Mon Sep 10, 2007 1:57 pm

+1

MMamdouh

REY04 · Post by **REY04** » Tue Sep 11, 2007 3:00 am

mohsen wrote:the smaller is plugged (dead end) and the bigger concern the hose coming from the breath hose ( the breath hose conect the cam cover and the air inlet)

cant agree for the breath hose bro. its the vaccum lines. the breather hose of the cam cover is placed on the hose intake of the manifold which i already removed. what i did now is plugged all these inlet tubes while am waiting for your suggestions. if you can post pics of your intake manifold the better.

REY04 · Post by **REY04** » Tue Sep 11, 2007 11:52 pm

any pics available to our fellow forumers?

Daniel · Post by **Daniel** » Fri Sep 14, 2007 11:31 am

Could this one for the Cielo help you? It's not hard to "translate".

Maybe you don't need all the connetions.

Daniel

goldiegill · Post by **goldiegill** » Fri Sep 14, 2007 12:36 pm

There are normally three vaccum pipes at the manifold. 1 big and 2 small. The bigger 1 is for the power brakes. One of the smaller ones goes to MAP (Manifold Actual Pressure) sensor and second one goes inside car's cabin for Blower Air Flow Direction Controls. u may plug the others if u don't have anything else which works on vaccum.

REY04 · Post by **REY04** » Fri Sep 14, 2007 10:58 pm

@goldiegill - thanks for the information bro.

REY04 · Post by **REY04** » Fri Sep 14, 2007 11:52 pm

@daniel - bro, can u pls translate to me in english conections d,e, f & g. i cant understand that language.

Man with no name · Post by **Man with no name** » Sat Sep 15, 2007 8:09 am

Heres a shot in the dark using a very basic online Romanian - English translator so you have a basic idea of what they are until Daniel posts the official translation. Note that LA, I think, can mean either TO or OF ..although Im 98 % sure it means to in this context.

A - Vacuum hose to( of? )fuel pressure regulator

C- i think its something like reservoir vacuum hose to A.C or something like that

D - Vacuum hose to the gas *canistrei* canistrei = canister? tank?

E - MAP (Manifold absolute pressure sensor ) Vacuum line OR Vacuum hose to MAP

F - no idea... ventilation hose to something?

G - Someone who knows automobile terms in Spanish should be able to help you out with this one. I speak spanish but dont know the names for car-related components... FURTUNUL DE IESIRE AL CANISTREI DE BENZINA means Tubo/manguera de salida al *canistrei* de gasolina, I think.... I dont know if this is the exact way of saying it.

Hope it helps

Trey05Woo · Post by **Trey05Woo** » Mon Nov 09, 2009 7:40 pm

One is plugged, one is MAP, one is Evap purge valve.

The original daewootech forum

vaccum lines

vaccum lines

Normally there are only 3 vaccum pipes

Re: vaccum lines