Clevite Bearings that fit G20GET fit T/U20SED engines
Moderators: daewoomofo, Moderators Group
-
blue4renza
- Posts: 97
- Joined: Tue Jul 21, 2009 1:33 am
- Location: stroudsburg pennsylvania (pocono mountians of pa)
- Contact:
Clevite Bearings that fit G20GET fit T/U20SED engines
Can Anyone confirm that the Rod and Main Bearings fit the T20SED/U20SED. I'm in the works of rebuilding my low mileage engine block and want reliable bearings the part numbers are CB-1408P con-rod and MS-2068P are the Main Bearings. My motor had 68,000 idk if i need std size or what but im gonna plasti-gage the whole crank and rod bearings, hope some one can help
-
gse_turbo
- DTM Daewoo Mod
- Posts: 2394
- Joined: Fri Jun 23, 2006 4:20 am
- Location: Englewood, Colorado United States
- Contact:
Re: Clevite Bearings that fit G20GET fit T/U20SED engines
yeah the 2.0 engines use the same main and rod bearings, 8v and 16v. the 2.2 uses a different main bearing.
unless you have the crank ground for different size bearings you will use standard size regardless of mileage.
if you don't already have the bearings ordered let me know. I have a ton in stock and ready to ship. I'll price match whatever you might have found.
unless you have the crank ground for different size bearings you will use standard size regardless of mileage.
if you don't already have the bearings ordered let me know. I have a ton in stock and ready to ship. I'll price match whatever you might have found.
