Search found 21 matches
- Tue Apr 19, 2011 2:49 pm
- Forum: Engine/Intake/Exhaust
- Topic: 01 Lanos cranks but wont turn over
- Replies: 7
- Views: 462
Re: 01 Lanos cranks but wont turn over
Cam position sensor? Ours had the same random misfire code. The CEL stayed on though, I never actually felt any misfire? But when the sensors was replaced that fixed the CEL. But we still see the CEL now and again it seems to vary with the gas quality, we usually use 89. You could use a dvom on the ...
- Tue Apr 19, 2011 5:41 am
- Forum: Engine/Intake/Exhaust
- Topic: 1998 nubira wont start after head change.
- Replies: 2
- Views: 912
Re: 1998 nubira wont start after head change.
Did this get resolved? If not maybe a bad cam position sensor? I think their was a recall on them.
.
.
- Tue Apr 19, 2011 5:24 am
- Forum: Engine/Intake/Exhaust
- Topic: Engine Interchange
- Replies: 6
- Views: 534
Re: Engine Interchange
Oh 15000 miles on the new motor cool. Yeah those cost are dead on. That's we've spent so far all sixteen valves bent but the bottom end looks good low speed when it the roller disintegrated on the intake side. So I'm trying to do the belt thing now and it's been a mayor PIA. Found a misprint in the ...
- Mon Apr 18, 2011 3:19 pm
- Forum: Engine/Intake/Exhaust
- Topic: Engine Interchange
- Replies: 6
- Views: 534
Re: Engine Interchange
I have a 1.6L, 2004 Aveo, with a broken belt and damaged head. I found a low mile 2007 motor that I would like to put in. The junk yards all say that it is not an interchange, and they can not tell me why. However I have read on the internet of one guy who did it. All he said to do is change the in...
- Fri Apr 15, 2011 4:51 pm
- Forum: Engine/Intake/Exhaust
- Topic: Nubria 2.0 Timing belt won't go on!
- Replies: 2
- Views: 320
Re: Nubria 2.0 Timing belt won't go on!
I changed out all the components, rollers, tensioner and water pump. Not trying to adjust the belt with the water pump. The guy on the Autozone DVD went on and on about indexing the water pump. It seemed to fit only one way? I rotated it till the tab was at eleven o'clock and it seemed to fall into ...
- Fri Apr 15, 2011 2:34 pm
- Forum: Engine/Intake/Exhaust
- Topic: Nubria 2.0 Timing belt won't go on!
- Replies: 2
- Views: 320
Nubria 2.0 Timing belt won't go on!
Hi guys new here. We have a Daewoo Nubria 2000, with the 20 engine. I love this wagon even though we have spent a butt load of cash keeping it on the road! Which brings me here! A roller bearing went out and the motor bent all 16 valves! Got the head off and rebuilt and reinstalled ordered a t belt ...