The original daewootech forum

my timing belt snapped, all the valves bent, the car is a 2000 Lanos with 66k miles, i had a head shop do the work on the heads. i have good compression across the board, i have good fuel pressure and delivery, good spark, every thing is hooked up properly... two questions: what is the firing order...

8) Some questions before I start bushings replacement. What's the real purpose of split sleeves on control arm rear bushing? Reducing diameter? What are the dimensions of those split sleeves? (ID/OD/length). I can't get them here (in my f&°""d country). How can I make them? From a steel tube? Thank...

Well here's the 4 intake and 2 exhaust vlave that need a little straightening... http://i28.photobucket.com/albums/c221/cbrRRman/Daewoo%20Nubira/bentvalves01.jpg http://i28.photobucket.com/albums/c221/cbrRRman/Daewoo%20Nubira/bentvalves02.jpg http://i28.photobucket.com/albums/c221/cbrRRman/Daewoo%20...

I had a hell of a time removing the 3 bolts that hold the upper portion of the inner timing belt cover (the only three that go thru the cover into the head) ... well actually just the upper center one... as the engine mount is in the way for any tool I know of... and these are the torx button head b...

Today I got into things a bit... In preperation to pull the head... I removed everything attached to it... and just pulled things back outta the way... Removed the cams... and damn... there it is... two sucked valves... Tomorrow I'll finish pulling the head to further inspect the damage valves and s...

Sorry to confuse... But the belt and tensioner and all the idler pulleys and h20 P were replaced immediately after I purchased the car... and it was done by a supposed Daewoo service center... Some Budget car rental place and the only place within 100 miles that will even service these things... the...

It is said that these 2.0 dohc's usually eat the valves when the belt goes... But hope that there might be some exceptions... Anyhow... it broke in a parking lot going real slow... without any noises or warning... 2 weeks ago... the tensioner was coming loose and making a rattling noise... I pulled ...

How do I tighten my handbrake? It's something that would be done on a garage service, but don't know how to do it myself. remove the back part of the mid consol... their is two screws, one on each side you will find a 10mm bolt at the end of the ebrake cable... tighten it a bit more. put every thin...

I searched some but didn't find a specific answer... In reference to my '01 Nubira 2.0 SE @ 89,000 miles I have a clicking sound that seems to be emitting possibly from the CV's... But only when they are cold... after they warm... it seems to diminish some... Odd thing is... it that that same clicki...

Nubira Huh ? I just replaced my right-side mtr. mount (front of engine) in my Lanos. The rubber part of the old one was cracked. If you go to Auto-Zone they can get you one. I recall the guy asking me which car and model was it for ? He was looking at a list of all Daewoo models. They don't care ab...

Hey there, Looking for some ideas for what is going on with my Daewoo Leganza. When I turn on the car and, the dashboard, steering wheel, and front side of the car vibrate a lot. You can actually see the steering wheel vibrating, and when you hold on to it; it vibrates your body. When I am driving ...

Well after scratching my head for many days... I finally figured out my vibration problem at idle... My original thread/complaint Sometimes the simplest things elude me... :smt102 :How I finally figured it out: Well when I eliminated everything motor performance related and a few dollars later... I ...

Yes,i just put that whole PSI kit 3 days ago,so far so good.running smooth That's a positive note... thanks... Just got mine in the mail... The belt doesn't get me all that excited though... Writing on it... "made in China to USA specs" Tensioner as well... And the pulleys say Slovakia... Here's ho...

myidisbetter wrote:Oops sorry, I did mean the TPS, I don't know why i said that. Mine was only like $64, but it might even be cheaper because the guy ripped me off like 200 dolllars

Good... Well now I feel less noobish... he he

I was looking everywhere in my Woo bible and could not find that

Its most likely your THC, its what broke on my car and sometimes it would rev up to 6000 rpms for no reason and sometimes it would rev so low my car would almost die. But im pretty sure this is what you need. It,s not that expensive, and I don't think its that hard to replace. What's THC... ?.. It'...